<strike id="rp7hj"><i id="rp7hj"></i></strike>

<noframes id="rp7hj"><form id="rp7hj"></form>
<address id="rp7hj"></address><address id="rp7hj"></address>

<address id="rp7hj"></address>

<address id="rp7hj"></address>
<address id="rp7hj"></address>
<form id="rp7hj"><nobr id="rp7hj"></nobr></form>
Current location:Home » News » Common problem
Online QQ Online QQ
Tel:
400-668-3236 Tel
Cooperation Cooperation
Recruitment Recruitment
How to maintain and maintain the hydraulic pump

2018-06-26 by Jun Tai


01
Check the fasteners of the product daily. For example, if the screws are loose, check the installation piping interface for oil leakage.

02
Check the cleaning of the oil seal. It is often necessary to clean the oil seal to prevent the life of the machine from being affected.

03
It is recommended to change the hydraulic oil after the first working for 500 hours. The maximum period of hydraulic oil replacement is 2000 hours, and the maximum replacement period with air filter is 500 hours.

04
To optimize the life of the hydraulic components, periodically change the hydraulic oil and filter. Hydraulic pollution is the main cause of damage to hydraulic components. Keep the hydraulic oil clean during routine maintenance and repairs.

05
For daily use, check whether the hydraulic tank position meets the requirements, and check the water content of the hydraulic oil and whether there is abnormal smell. When the hydraulic oil contains water, the oil is turbid or milky, or there is water droplets on the bottom of the tank. When there is foul odor in the oil, it indicates that the working temperature of the hydraulic oil is too high. When the above situation occurs, please immediately change the hydraulic oil and find out the cause of the problem and solve it. Daily attention to check the vehicle for leaks. 6. During the test run and operation, the axial piston pump components must be filled with hydraulic oil and vented. After a long period of downtime, oiling and venting operations are required as the system may drain through the hydraulic lines.

06" During the test run and operation, the axial piston pump components must be filled with hydraulic oil and vented. After a long period of downtime, oiling and venting operations are required as the system may drain through the hydraulic lines.

07
Contamination has fatal damage to hydraulic components, ensuring a clean working environment for maintenance and repair. Thoroughly clean the pump or motor before starting maintenance or repairs.

08
Regularly replace the system's hydraulic oil and filters according to the recommended standards to ensure efficient and safe operation of the system and regular replacement of consumable parts.

1.jpg

Guangdong Juntai Hydraulic Technology Co., Ltd.
天际彩票